luorocarbon special primer coating: 1) Mix ( A )Primer coating, ( B ) curinge agent and ( C ) thinner in a barrel according to ratio by weight; 2) Fully mix and stir in 4-5 min until without equal bubbles, ensure paint be fully stirred. The main purpose of this primer is to reach the anti-water,and seal the substrate completely and avoid air-bubbles in the body coating; 3) The reference consumption is 0.15kg/m2. Rolling, brush or spray the primer evenly (as the attached picture show) by 1 time; 4) Wait after 24 hours, the next application step to coat the fluorocarbon top coating; 5) After 24 hours, according to the site condition, polishing can be done, this is optionally; 6) Inspection: ensure the paint film is evenly with uniform color, without hollowing.Application Step

Property	Solvent based ( Oil based )
Dry film thickness	25mu/layer
Theoretical coverage	0.2kg/㎡/layer
Mixed using time	＜0.5h  ( 25°C )
Drying time (touch)	＜2h   ( 25°C )
Drying time (hard)	>24h ( 25°C )
Flexibility (mm)	1
Resistance to contamination (reflectance reduction rate,%)	< 5
Scouring resistance (times)	> 1000
Water Resistance (200h)	No blistering, no shedding
Salt spray resistance (1000h)	No blistering, no shedding
Corrosion Resistance: (10% sulfuric acid, hydrochloric acid)30 days	No change in appearance
Solvent Resistance: (benzene, volatile oil) for 10days	No change in appearance
Oil Resistance: (70 # gasoline) for 30 days	No change in appearance
Corrosion Resistance: (10% sodium hydroxide) for 30 days	No change in appearance
Service life	>15 years
Paint colors	Multi-colors
Application way	Roller, spray or brush
Storage	5-25℃, cool, dry

PrimerPre-treated substrateMiddle coatingVarnish (optionally)Top coating

Application Scope

Suitable for metal structure, concrete construction, brick surface, asbestos cement, and other solid surface decoration and protection.

Package

20kg/barrel, 6kg/barrel.

Storage

This product stored at above 0 ℃, well ventilation, shady and cool place.

Surface preparation he surface should be polished, repaired, dust collected according to the site basic surface condition; Correct substrate preparation is critical for optimum performance. Surface should be sound, clean, dry and free from loose particles, oil, grease, and other contaminants. Fluorocarbon top coating: 1) Mix ( A ) fluorocarbon paint, ( B ) curing agent and ( C ) thinner in a barrel according to ratio by weight; 2) Fully mix and stir in 4-5 min until without equal bubbles, ensure paint be fully stirred; 3) The reference consumption is 0.25kg/m2. Rolling, brush or spray the top coating evenly (as the attached picture show) by 1 time; 4) Inspection: ensure the paint film is evenly with uniform color, without hollowing.1) The mixing paint should be used within 20 minutes; 2) Maintain 1 week, can be used when paint is solid absolutely; 3) Film protection: keep away from stepping on, rain, exposing to sunlight and scratching until the film is fully dried and solidified.